Morphologically controlled synthesis of 1-dimensional selenium dioxide and study of its application as catalyst for diesel fuel additive

In this research work, selenium dioxide (SeO₂) nanorods have been prepared by a solvothermal method in which a strong reducing agent (NaBH₄) was used to reduce precursor salt into SeO₂ nanorods. X-ray diffraction (XRD) technique was applied to observe the crystal structure which confirmed its tetragonal geometry. Moreover, morphology and particle size were studied by scanning electron microscopy (SEM). SEM fully described the 1-dimensional morphology of SeO₂ nanorods which then arranged themselves to create a 3-dimensional flower-like structure with an average particle size of 50 nm. Also, the catalytic activity of SeO₂ nanorods as diesel-additive was studied by defining different parameters such as fire and flash points, calorific value, cloud and pour points, specific gravity, and kinematic viscosity. Subsequently, SeO₂ nanorods proved to be an excellent diesel additive due to higher total heat content and lower value of kinematic viscosity which enhances the better performance of the diesel engine.     

Numerical study on thermal performance of TiO2, Fe3O4 and NiCr/engine oil in an inclined wavy pip

The essential intention of the existing article is to illustrate the effect of wall properties on flow and thermal behavior, through a sinusoidal inclined wavy pipe. To succeed this phenomena we assume a sinusoidal pipe consist of wavy surface, whose walls traveling down to its borders and located at an inclined position, moreover titanium dioxide (TiO₂), ferrosoferric oxide (Fe₃O₄) and nichrome (80% Ni and 20% Cr) are considered as nano-particles and unused engine oil is assumed as a base fluid. The arising mathematical equations for thermal and flow ratio with wall slip impact are solved by mathematica. Also, evaluate graphically the thermal and flow behavior of nanofluids for multi values of solid volume fractions (η), rigidity parameter (M₁), stiffness parameter (M₂), viscous damping parameter (M₃), Grashof number (G_r), slip parameter (β) and heat generation parameter (H) also discuss the streamlines for different values of solid volume fraction.     

4D Printing based piezoelectric composite for medical applications

Additive manufacturing (AM), otherwise known as three‐dimensional (3D) printing, is driving major innovations in many areas, such as engineering, manufacturing, art, education, and medicine. Although a considerable amount of progress has been made in this field, additional research work is required to overcome various remaining challenges. Recently, one of the actively researched areas lies in the AM of smart materials and structures. Electroactive materials incorporated in 3D printing have given birth to 4D printing, where 3D printed structures can perform as actuating and/or sensing systems, making it possible to deliver electrical signals under external mechanical stimuli and vice versa. In this paper, we present a lightweight, low cost piezoelectric material based on the dispersion of inorganic ferroelectric submicron particles in a polymer matrix. We report on how the proposed material is compatible with the AM process. Finally, we discuss its potential applications for healthcare, especially in smart implants prostheses. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 109–115     

Experimental studies on the effect of ultrasonic treatment and hydrogen donors on residual oil characteristics

Residual oil, the residue after the distillation of crude oil, imposes deleterious effects on refinery due to its high viscosity and asphaltene content. In this context, ultrasonic technology has been widely applied in refining processes given its high efficiency and minimal environmental impacts. To guide the selection of operation parameters, in this work, we probed the effect of treatment duration, power, and hydrogen donor on the characteristics of residual oil under ultrasonic treatments. Underlying mechanisms of ultrasonic treatments, in the absence and presence of hydrogen donors, were verified through systematically analyzing viscosity, component conversion, molecular weight, hydrogen distribution, and functional groups of residual oil. While viscosity reductions under low-power density treatment are caused by colloidal system disaggregation, high-power density treatment can bring in both chemical bond cleavage and colloidal system disaggregation. In addition, adding hydrogen donor can effectively prevent radical recombination, and thus increases the yield of saturate. These results provide fundamental understandings on the effects of ultrasonic treatments.     

增材制造金属反射镜的发展综述

随着光学测量与遥感领域的不断发展,折反式光学系统对重量、体积和环境适应性等需求不断提高。基于增材制造技术的金属反射镜以其便于实现优化设计、快速制造和加工工艺性好等优点,逐渐获得国内外学者的关注与研究。与传统金属反射镜相比,增材制造金属反射镜可以提高反射镜的结构刚度,同时可实现更高程度的轻量化。增材制造反射镜可以满足光学系统对环境适应性和快速性的需求。本文首先讨论了金属反射镜的评价指标;其次,综述了国内外在基于增材制造技术制备金属反射镜领域的发展现状和技术参数,从增材制造金属反射镜的基体设计与制备和基体的后处理2个方面展开论述;然后,通过分析,总结了增材制造金属反射镜的技术路线和关键技术;最后,对增材制造反射镜的应用前景提出了展望。     

Chemically characterised Pimenta dioica (L.) Merr. essential oil as a novel plant based antimicrobial against fungal and aflatoxin B1 contamination of stored maize and its possible mode of action

Abstract

The chemical characterisation of Pimenta dioica essential oil (PDEO) revealed the presence of 50 components, amongst which α-Terpineol (30.31%) was the major component followed by β-Linalool (6.75%) and γ-Terpinene (4.64%). The oil completely inhibited the growth of aflatoxin B₁ secreting strain Aspergillus flavus LHP-VS-8 and aflatoxin B₁ production at 2.5?µL/mL and 1.5?µL/mL, respectively. The oil caused dose dependent reduction of methylglyoxal (an AFB₁ inducer), enhanced leakage of Ca²⁺, Mg²⁺ and K⁺ ions and significantly reduced ergosterol content of fungal plasma membrane. During in situ experiments, PDEO exhibited complete protection of fumigated maize cob slices from fungal infestation without affecting seed germination. The chemically characterised PDEO is recommended as a plant based preservative and shelf life enhancer of food commodities by preventing fungal growth, AFB₁ production and lipid peroxidation. This is the first report on PDEO as inhibitor of AFB₁ secretion and methylglyoxal biosynthesis.     

Assessment of conventional and microwave heating effects on the variation of the bioactive compounds of Chétoui VOO using HPLC-DAD-ESI-TOF-MS

The goal of this work was to monitor the hydrophilic profile of the virgin olive oil (VOO) of the second main Tunisian variety, “Chétoui”, in order to achieve a better understanding of the behavior of the bioactive phenolic compounds during 0, 2, 5, 10, and 15 min of microwave heating at medium power 800 W, and 0, 2.5, and 5 h of conventional heating at 180 °C. The extent of the oxidative and hydrolytic degradation of the different phenolic subclasses was evaluated using high-performance liquid chromatography (HPLC) coupled to electrospray time-of-flight mass spectrometry (TOF-MS) method. During heating process, the most represented component in Chétoui VOO was found to be isomer 1 and 2 of deacetoxy oleuropein aglycone, and hydroxy decarboxy oleuropein aglycon. These compounds may be considered as direct markers for the degree of transformation of secoiridoids during heating process. Among the studied phenolic compounds, hydroxytyrosol, tyrosol, luteolin and apigenin displayed the highest heating resistance in the whole time range of microwave and conventional applications. However, the main secoiridoids quantified in the fresh VOO, isomer 2 of oleuropein aglycone, and ligstroside aglycone, decreased in concentration with the thermal treatment and this decrease was drastic under conventional heating.     

缝洞型碳酸盐岩油藏注水驱油提高采收率研究

Y油田为缝洞型碳酸盐岩油藏,油藏复杂的地质特征决定了其开发模式有别于常规砂岩油藏.为了有效提高Y油田采收率,利用Eclipse数值模拟软件建立了地质模型,对水平井长度、射孔间距及酸压缝长等油藏产能影响因素与转注时机、注采比以及关井时间等注采参数进行了优化.结果认为:对于Y缝洞型碳酸盐岩油藏,水平井水平段长度为500m、射孔间距为20m或酸压规模为100m时,累计产油量可达到最大值;压力降至废弃压力时进行转注,可获得最大采收率;周期注采比等于1时,周期时效与累计增油量达到最大值;关井时间为8天时,采收率提高幅度最大.     

超临界水驱超稠油提高采收率热物理特性研究

超稠油资源的高效开发对于提高石油供给和保障我国石油安全意义重大。针对深层超稠油资源由于原始地层压力高、原油黏度大导致常规蒸汽驱无法有效开发的问题,本文提出超临界水驱开发深层超稠油的新思路。本文首先研制了超临界水驱油提高采收率实验平台,研发的管式填砂岩心模型能够模拟岩心升温和驱替的同步过程,然后开展了超临界水驱、蒸汽驱和热水驱对比实验研究,实验结果表明,相对于蒸汽驱,超临界水驱能显著提高采收率并具有更高的热效率,25MPa、400℃超临界水驱鲁克沁超稠油的采收率达到97.07%;获得了超临界水驱过程的温度场和驱替压差变化规律,发现了超临界水超覆现象,与蒸汽超覆相比,超临界水超覆发生晚且持续短,可扩大波及范围,提高采收率。